Skills of using APC Schneider UPS

The function of uninterruptible power supply (UPS) is mainly aimed at the computer network system, which can continuously supply power in the state of power failure, and can also prevent data loss. In the daily use process, in order to ensure the service life of the power supply and meet their own needs, it is very important to make clear the relevant use skills.

First, in the use, should be clear about the relevant issues. How to extend the power supply time of UPS, there are two methods at present, they are external large capacity battery pack, choose a larger power system. Of course, different solutions, specific operation skills are different. When choosing the method of external large capacity battery pack, it is necessary to define the specific power supply time and load power, and then select the corresponding external battery pack. When using this method, the charging time of battery pack will be increased. The maintenance cost can be reduced by choosing a larger power supply system. Even if the load equipment needs to be expanded, the uninterrupted system with large capacity can operate normally.

Second, in the start-up operation, it should be switched on in order, the energy storage battery switch, the automatic bypass switch, and the output switch should be placed in the on position in turn. When pressing the panel open key, the power system will start slowly, and at this time, for the majority of users, should carefully observe the change of indicator light.

Third, in the daily process of switching on and off, you only need to press the start button, about 20 minutes, you can turn on other instruments. When the power supply starts to enter the stable working state, the power switch of the load equipment can be turned on. At this time, it should also be clear that the power supply in normal operation, manual maintenance switch, should be turned off