How to deal with the damage of apcups power fuse?

Apcups power fuse damage is the most common "fault", if so sent to repair is not necessary. However, the damage of apcups power fuse is not like some people think, which shows that there is no response after power on. In most cases, the UPS is in the inverter state after the power switch is turned on

Apcups power fuse damage is the most common "fault", if so sent to repair is not necessary. However, the damage of apcups power fuse is not like some people think, which shows that there is no response after power on. In most cases, the performance is that after the power switch is turned on, the UPS is in the inverter state, unable to switch to the mains voltage stabilization state, because the power fuse is located at the incoming line of the mains, the damage of the fuse is the same as the result of the mains power outage, and the inverter circuit in the ups must work (however, if the inverter time is too long and no one finds out, resulting in the over discharge of the battery in the machine, the performance is another One situation.

It's very simple to replace the apcups fuse tube, and you don't need to open the shell. Just find the bakelite fuse tube seat behind the machine, screw off the cover, take off the damaged fuse tube, and replace it with a new fuse tube with the same current. However, do not forget to unplug the power plug in the process, because there is electricity on the fuse tube seat!